SA-3 cylinder shape burrs are ideal for interior contour work and deburring. Due to the extreme hardness of this tungsten carbide, you can use it on far more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs usually are suited for ferrous and non-ferrous metals, soft steel, and for all non-metal materials including stone, plastics, wood floor, and ceramic. Double cut burrs will leave a somewhat smoother finish than single cut due to producing smaller chips because they cut away the pad. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and may view you through most applications.

Machines Used On:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Certain, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are good for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed will be determined through the material you are using your burr on. If you might be experiencing chipping, you are most likely operating at excessive of speed to the application. Start using a slower speed and increase in the process and soon you attain the best results

Apply light pressure and allow tool perform the work. Bearing down on the tool will result in reduced tool life plus a dull burr.

Always wear proper PPE to add (but not limited by) safety glasses, hearing protection, respirator, and hand protection. Keep all guards set up on your own machine.

Avoid experience electrical power drills; the slower speeds can lead to chipping of your workpiece.
For more info about SA-3 Carbide Burrs check this web site