SA-3 cylinder shape burrs are perfect for interior contour work and deburring. Because of the extreme hardness with this tungsten carbide, technology-not only on much more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs are usually used on ferrous and non-ferrous metals, soft steel, as well as all non-metal materials like stone, plastics, real wood, and ceramic. Double cut burrs will leave a rather smoother finish than single cut as a result of producing smaller chips since they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is the most popular cut and will view you through most applications.

Machines Applied to:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Surefire, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed will be determined through the material you are using your burr on. If you might be experiencing chipping, you are most probably operating at way too high of speed for your application. Start which has a slower speed while increasing on the way and soon you attain the greatest results

Apply light pressure and permit the tool perform the work. Bearing upon the tool can result in reduced tool life and a dull burr.

Always wear proper PPE to incorporate (and not restricted to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards available on the machine.

Avoid experience electricity drills; the slower speeds may result in chipping of the workpiece.
To learn more about SA-3 Carbide Burrs check out this popular internet page